Lever Only
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Install the gearshift lever (1) in the gearshift lever assembly (2).
- Install the gearshift lever pinch bolt (7) and tighten to specifications. Refer to COLUMN, SPECIFICATIONS .
- Connect the gearshift harness retainers (6).
- Connect the gearshift harness connector (5).
- Install the upper and lower column shrouds, steering column opening cover, and reinforcement. Refer to SHROUD, STEERING COLUMN, INSTALLATION .
- Connect the negative battery cable.