LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 866 (Front Suspension & Wheel Alignment - 2500 Hd & 3500 Hd) >> Front, Link And Coil >> Bushing(S) >> Removal >> Axle Bushing

Axle Bushing

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the control arm from the axle. Refer to ARM, CONTROL, REMOVAL .
  2. Install the special tool. (special tool #10511, Remover/Installer, Bushing)
  3. Press the bushing out of the axle housing.
scientia non olet · About LEMON Manuals