Diagnostic Test

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

POWERTRAIN CONTROL MODULE (PCM)

Repair

Using the schematics as a guide, check the PCM connector and all related in-line connector terminals for corrosion, damage, or pushed out terminals. Pay particular attention to the power and ground circuits. Check Service Bulletins for possible causes that may apply. If no problems are found, replace and program the PCM in accordance with the Service Information. Refer to MODULE, POWERTRAIN CONTROL, REMOVAL .
Perform VERIFICATION TEST. Refer to TRANSMISSION VERIFICATION TEST .