LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 840 (3.6L - DTCS P0532 To P1278 - 1500) >> Diagnosis And Testing >> P1205-Fuel Pump Control Module Internal Performance >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC 

  1. Turn the ignition on, engine not running.
  2. With the scan tool, read DTCs and record on the repair order.

    Is the DTC active or pending?

    Yes 

    • Replace the Fuel Pump Control Module in accordance with the Service Information.
    • Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .

    No 

scientia non olet · About LEMON Manuals