LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 834 (3.0L Diesel - DTCS P20BF-00 To P24AF-00 - 1500) >> Diagnosis And Testing >> P249F-00-Excessive Time To Enter Closed Loop DPF Regeneration Control >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

CHECKING FOR OTHER PCM DTCS 

  1. Turn the ignition on.
  2. With the scan tool, read the PCM DTCs.

    Are there any other DPF, PM Sensor, EGR, FRP, Injector, or O2 Sensor DTCs present?

    Yes 

    • Perform the Diagnostics for those DTCs before continuing with this one.
    • Perform the PCM VERIFICATION TEST. Refer to PCM VERIFICATION TEST .

    No 

    • Replace the Powertrain Control Module (PCM) in accordance with the service information.
    • Perform the PCM VERIFICATION TEST. Refer to PCM VERIFICATION TEST .