Solenoid, Evaporative Emissions Purge: Description: 3.6L
WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
The purge solenoid (1) is located in the engine compartment attached to the right side of the intake manifold and held in place with a rubber grommet (2). The molded vapor line (3) is part of the purge solenoid.
The Powertrain Control Module (PCM) operates the EVAP canister purge solenoid depending upon engine operating conditions.