Torque Converter
WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission from the vehicle. Refer to REMOVAL .
- Place a suitable drain pan under the torque converter housing end of the transmission.CAUTION:
Verify that transmission is secure on the lifting device or work surface, the center of gravity of the transmission will shift when the torque converter is removed creating an unstable condition. The torque converter is a heavy unit. Use caution when separating the torque converter from the transmission.
- Pull the torque converter forward until the center hub clears the oil pump seal.
- Separate the torque converter from the transmission.
- Check the input shaft O-ring (1) for damage, replace if necessary.