3.0L Diesel
WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Saturate the clamp nuts with spray lubricant. Allow 5 minutes for penetration.
- Remove the tailpipe assembly. Refer to TAILPIPE, EXHAUST, REMOVAL .
- Loosen the clamps and nuts from muffler assembly (3).
- Remove the muffler assembly (3) from the isolators (1, 2 and 4).