Seal(S), Valve Guide: Installation: Installation
WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Install the valve guide seal (1).
- Install the valve springs, retainers.
- Use Valve Spring Compressor Tool (special tool #C-3422-D, Compressor, Valve Spring) and the Valve Spring Compressor Adapter (special tool #10224, Adapter, Valve Spring) and compress each valve spring and install the valve spring lock.
- Repeat this procedure for all cylinders.
- Install the cylinder head. Refer to CYLINDER HEAD, INSTALLATION .
- Connect the negative battery cable.