LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 753 (Base Brakes (Service Information) 1500) >> Hydraulic/Mechanical >> Pads, Brake >> Removal >> Front - Light Duty

Front - Light Duty

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Caliper Mounting Bolt Component Location
GC0083366Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the wheel and tire assemblies.
  3. Compress the caliper (2).
  4. Remove the caliper slide pin bolts (4).
    Fig 2: Brake Caliper & Adapter
    GC0091565Courtesy of CHRYSLER GROUP, LLC
  5. Remove the caliper (1) from the caliper adapter (2).
    NOTE:

    Do not allow brake hose to support caliper assembly.

  6. Support and hang the caliper.
    Fig 3: Identifying Brake Pads & Components
    GC0083367Courtesy of CHRYSLER GROUP, LLC
  7. Remove the inboard brake pad (4) from the caliper adapter (1).
  8. Remove the outboard brake pad (2) from the caliper adapter (1).
    Fig 4: Identifying Brake Pad And Anti-Rattle Clips
    GC0083368Courtesy of CHRYSLER GROUP, LLC
  9. Remove the anti-rattle clips (1) from the pad (2).
scientia non olet · About LEMON Manuals