LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 752 (Rear Suspension - 1500) >> Arm, Lower Control >> Removal >> Removal

Arm, Lower Control: Removal: Removal

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Support the rear axle with a suitable holding fixture.
    Fig 1: Guide Bolt, Upper Control Arm Bolts & Nut
    GC0088301Courtesy of CHRYSLER GROUP, LLC
  3. Remove the parking brake cable guide bolt (Left side only).
    Fig 2: Lower Control Arm Bolt & Nut At Axle And At Frame
    GC0088302Courtesy of CHRYSLER GROUP, LLC
  4. Remove the lower control arm bolt (1) and nut at the axle and discard the nut  .
  5. Remove the lower control arm bolt and nut (2) at the frame.
  6. Remove the lower control arm from the vehicle.
scientia non olet · About LEMON Manuals