Motor, Winch: Removal: Removal

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Winch Assembly & Bolts

Courtesy of CHRYSLER GROUP, LLC

Remove the winch assembly (2). Refer to WINCH, REMOVAL .

Fig 2: Roller, Shaft & Clips
Courtesy of CHRYSLER GROUP, LLC
Separate one of the roller shaft clips (1), remove the shaft (3) and the roller (4).

Fig 3: Winch Mounting Bracket Assembly & Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the bolts (3) and separate the support bracket (1) from the winch assembly (2).

Fig 4: Relay Pack Cover & Screws
Courtesy of CHRYSLER GROUP, LLC
Remove the relay pack (1). Refer to RELAY PACK, WINCH, REMOVAL .

Fig 5: Mounting Bolts And Motor
Courtesy of CHRYSLER GROUP, LLC
Stand winch assembly on the clutch end with the motor up to make it easier to align the motor coupler and drive shaft.
Remove the two motor mounting bolts (1) and carefully lift the motor (2) off of the drum assembly.