Torque Specifications: Specifications
WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
INDEPENDENT FRONT SUSPENSION TORQUE SPECIFICATIONS - 1500 - 4X2 AND 4X4
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Shock Absorber Lower Bolt (W/Air Suspension) | 170 | 125 | - |
| Shock Absorber Lower Bolt (4X4) (Non-Air) | 170 | 125 | - |
| Shock Absorber Lower Bolt (4X2) (Non-Air) | 26 | 19 | - |
| Shock Absorber to Frame Upper Nut | 61 | 45 | - |
| Shock Rod to Mount Assembly Nut | 35 | 26 | - |
| Lower Control Arm Frame Nuts | 210 | 155 | - |
| Lower Control Arm Ball Joint Nut | 51, Then an additional 90° | 38, Then an additional 89° | - |
| Upper Control Arm Frame Nuts | 176 | 130 | - |
| Upper Control Arm Ball Joint Nut | 35 Then an additional 180° | 26, Then an additional 180° | - |
| Stabilizer Bar Frame Bolt | 90 | 66 | - |
| Stabilizer Link Lower Control Arm Nut | 102 | 75 | - |
| Stabilizer Link Stabilizer Bar Nut | 22 | 16 | 195 |
| Strut Mount To Strut Tower | 61 | 45 | - |
| Hub/Bearing Bolts | 60, Then an additional 80° | 44, Then an additional 80° | - |
| Half Shaft Nut | 250 | 184 | - |