Diagnostic Test

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

CHECK THE WIRING AND CONNECTORS

Using the schematics as a guide, check the Powertrain Control Module (PCM) terminals for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits.
Wiggle the wires while checking for shorted and open circuits.
Check for any Service Bulletins that may apply.
Were there any problems found?

Yes
- Repair the power and/or ground circuits as necessary.
- Perform the 68RFE TRANSMISSION VERIFICATION TEST. Refer to the 68RFE TRANSMISSION VERIFICATION TEST .
No
- Replace the PCM in accordance with the Service Information. With the scan tool, perform Quick Learn.
- Perform the 68RFE TRANSMISSION VERIFICATION TEST. Refer to the 68RFE TRANSMISSION VERIFICATION TEST .