LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 731 (6.4L - DTCS P1607 To P2317 - 2500 Hd, 3500 Hd) >> Diagnosis And Testing >> P2123-Accelerator Pedal Position Sensor 1 Circuit High >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
POSSIBLE CAUSES
5-VOLT SUPPLY CIRCUIT SHORTED TO VOLTAGE
APP SIGNAL 1 CIRCUIT SHORTED TO VOLTAGE
APP SIGNAL 1 CIRCUIT SHORTED TO THE 5-VOLT SUPPLY CIRCUIT
APP SIGNAL 1 CIRCUIT OPEN OR HIGH RESISTANCE
SENSOR GROUND CIRCUIT OPEN OR HIGH RESISTANCE
ACCELERATOR PEDAL POSITION SENSOR
POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .