LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 ((Memory Seat Module (MSMD) - Electrical Diagnostics)) >> Diagnosis and Testing >> B1D56-Adjustable Pedal Sensor Circuit Low >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Voltage on the (G13) Adjustable Pedals Sensor Supply circuit is not within a specified range. The Memory Seat Module (MSM) will not be able to detect pedal position. When the Adjustable Pedals switch is pressed, the pedals will move for approximately two seconds then the module turns off the output.

scientia non olet · About LEMON Manuals