LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Anti-Lock Brake System (Abs) (Service Information)) >> Hydraulic/Mechanical >> Hydraulic Control Unit (HCU) >> Operation >> Operation >> Pressure Increase

Pressure Increase

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The inlet valve is open and the outlet valve is closed during the pressure increase cycle. The pressure increase cycle is used to reapply the brakes. This cycle controls re-application of fluid apply pressure.

scientia non olet · About LEMON Manuals