When Monitored And Set Conditions
WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
When Monitored:
This diagnostic runs continuously when the following conditions are met:
- The bus is awake.
- The Battery voltage is between 10.0 and 16.0 volts.
- The Body Control Module (BCM) is configured correctly.
Set Conditions:
- The Door Module detects CAN Interior bus messages not received from the Blind Spot Detection Module.
Default Actions:
- The Blind Spot warning indicator of the Mirror is not operational.
| Possible Causes |
|---|
| CAN BUS CIRCUITS OPEN OR SHORTED |
| DTCS RELATED TO BATTERY VOLTAGE, IGNITION, OR VIN MESSAGES |
| BLIND SPOT DETECTION MODULE POWER AND GROUND |
| BCM NOT CONFIGURED CORRECTLY |
| BLIND SPOT DETECTION MODULE |
| MODULE THAT SET THIS DTC |