Tube, Exhaust Gas RECIRCULATION (EGR), Crossover: Removal: Removal
WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER GROUP, LLC
- Disconnect the battery negative cable.
- Loosen and remove the bolts (1) at ends of EGR Crossover Tube (2).
- Remove EGR crossover tube (2).
- If the seal is damaged, remove and discard gaskets at each end of tube (2).