LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 656 (6.7L Engine (Service Information) 2500 Hd & 3500 Hd) >> Engine Block >> Tappet(S), Valve >> Inspection >> Inspection

Tappet(S), Valve: Inspection: Inspection

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Tappet Inspection
GC0108576Courtesy of CHRYSLER GROUP, LLC
TAPPET STEM DIAMETER
15.936 mm (0.627 in.) MIN.
15.977 mm (0.629 in.) MAX.
  1. Visually inspect the tappet the tappet socket, stem, and face for excessive wear, cracks, or obvious damage.
  2. Measure the tappet stem diameter. Replace the tappet if it falls below the minimum size.