LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 656 (6.7L Engine (Service Information) 2500 Hd & 3500 Hd) >> Air Intake System >> Air Cleaner >> Removal >> Removal

Air Cleaner: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

There is no filter minder on the air intake for the 6.7L. There will be an EVIC message which will display when the filter restriction reaches it's maximum. The customer will be required to replace it with-in 250 miles (402 KM).

Fig 1: Identifying Clamp, Air Cleaner Cover & Screws
GC0155117Courtesy of CHRYSLER GROUP, LLC
  1. Loosen clamp (1) and disconnect air tube.
  2. Loosen screws (3) from top of air cleaner cover (2) and tilt housing cover up for removal.
    Fig 2: Air Cleaner Filter
    GC0155196Courtesy of CHRYSLER GROUP, LLC
  3. Remove air cleaner filter (1) from air cleaner housing (2).