LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 653 (5.7L CNG Engine (Service Information) 2500HD) >> Cylinder Head >> Valves, Intake And Exhaust >> Removal >> Removal

Valves, Intake And Exhaust: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cylinder head. Refer to CYLINDER HEAD, REMOVAL, 5.7L  .
  2. Compress valve springs using Valve Spring Compressor Tool (special tool #C-3422-D, Compressor, Valve Spring) and Adapter (special tool #8464, Adapter, Valve Spring).
  3. Remove valve retaining locks, valve spring retainers, valve stem seals and valve springs.
  4. Before removing valves, remove any burrs from valve stem lock grooves to prevent damage to the valve guides. Identify valves to ensure installation in original location.
scientia non olet · About LEMON Manuals