LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 644 (Heating & Air Conditioning (Service Information) 2500 Hd & 3500 Hd) >> Distribution >> Duct, Instrument Panel >> Installation >> Installation

Duct, Instrument Panel: Installation: Installation

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Center Distribution Duct
GC0089542Courtesy of CHRYSLER GROUP, LLC
  1. Position the driver side instrument panel duct (2) and the center distribution duct (4) to the instrument panel support (5).
  2. Install the two retainers (1 and 3) that secure the center distribution duct (4) to the middle of the instrument panel support.
    Fig 2: Passenger & Driver Side Instrument Panel Duct
    GC0089541Courtesy of CHRYSLER GROUP, LLC
  3. Position the passenger side instrument panel duct (2) the instrument panel support (3) and connect it to the center distribution duct.
  4. Install the two retainers (1) that secure the passenger side instrument panel duct and the driver side instrument panel duct (4) to the middle of the instrument panel support.
    Fig 3: Driver Side Instrument Panel Duct
    GC0089540Courtesy of CHRYSLER GROUP, LLC
  5. Install the retainer (3) that secures the driver side instrument panel duct (1) to the end of the instrument panel support (2).
    Fig 4: Passenger Side Instrument Panel Duct
    GC0089539Courtesy of CHRYSLER GROUP, LLC
  6. Install the retainer (1) that secures the driver side instrument panel duct (3) to the middle of the instrument panel support (2).
  7. Install the retainer (4) that secures the passenger side instrument panel duct (6) to the middle of the center distribution duct (5).
    Fig 5: Passenger Side Instrument Panel Duct & Middle Support
    GC0089538Courtesy of CHRYSLER GROUP, LLC
  8. Install the retainer (2) that secures the passenger side instrument panel duct (3) to the middle of the instrument panel support (3).
    Fig 6: Passenger Side Instrument Panel Duct
    GC0089537Courtesy of CHRYSLER GROUP, LLC
  9. Install the retainer (3) that secures the passenger side instrument panel duct (2) to the end of the instrument panel support (1).
    Fig 7: Center Distribution & Driver Side Demister Duct
    GC0089535Courtesy of CHRYSLER GROUP, LLC
  10. Position the driver side demister duct (2) to the instrument panel support (4) and connect it to the distribution duct (3).
  11. Install the retainer (1) that secures the driver side demister duct to the instrument panel support.
    Fig 8: Passenger Side Demister Duct & Passenger Side Instrument Panel Duct
    GC0089536Courtesy of CHRYSLER GROUP, LLC
  12. Position the passenger side demister duct (5) to the instrument panel support (6) and connect it to the distribution duct (4).
  13. Install the retainer (2) that secures the passenger side demister duct to the passenger side instrument panel duct (3).
  14. Install the retainer (1) that secures the passenger side demister duct to the instrument panel support.
  15. Install the instrument panel cover. Refer to COVER, INSTRUMENT PANEL, INSTALLATION .
  16. Install the instrument panel. Refer to PANEL, INSTRUMENT, INSTALLATION .
scientia non olet · About LEMON Manuals