LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 642 (Rear Suspension - 2500 Hd & 3500 Hd) >> Arm, Upper Control >> Removal >> Removal

Arm, Upper Control: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Tightening The Upper And Lower Control Arm Fasteners
GC0161573Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Support the rear axle with a suitable holding fixture.
  3. Remove the upper control arm bolt and nut (5) at the axle and discard the nut  .
  4. Remove the upper control arm front bolt (1) and nut at the frame.
  5. Remove the upper control arm (6) from the vehicle.
scientia non olet · About LEMON Manuals