LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 638 (Body - Interior & Exterior - 2500 Hd & 3500 Hd) >> Weatherstrip/Seals >> Weatherstrip, Door >> Removal >> Removal

Weatherstrip, Door: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inner Belt Molding
GC0088951Courtesy of CHRYSLER GROUP, LLC
  1. Open the appropriate door.
  2. If removing the rear door seal, using a trim stick or equivalent, remove the rear trim from the rear door.
  3. Carefully remove the door seal (6) from the door retainers.
  4. Remove the seal from the door.