Cable, Hood Release: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 3500 HD and 2014 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood Release Cable

Courtesy of CHRYSLER GROUP, LLC

Release the cable end (1) from the latch mechanism (5) and release the collar (2) from the latch.
Release the support clip (4).

Fig 2: Hood Release Cable Retainers
Courtesy of CHRYSLER GROUP, LLC
Remove the three hood release cable retainers (2) from the upper radiator crossmember and the left fender rail.

Fig 3: Releasing Hood Release Clip

Courtesy of CHRYSLER GROUP, LLC

From inside the vehicle using a small flat bladed tool (3), release the clip (2) attaching the hood release handle (1) to the instrument panel.

Fig 4: Removing/Installing Handle

Courtesy of CHRYSLER GROUP, LLC

Separate the handle (1) by pulling down and release the handle assembly tabs from the instrument panel.

Fig 5: Hood Release Handle

Courtesy of CHRYSLER GROUP, LLC

Remove the grommet from the cowl panel and remove the hood release cable and handle assembly.