TCM Adaptation Procedures: Notes

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Performing a reset of the Transmission Adaptation values does not automatically trigger the TCM to relearn the Adaptation values. If a reset is performed, both procedures must be performed to restore optimal shift quality. Do not reset these values unless specifically instructed to do so.

NOTE:

This procedure does not need to be performed if the existing TCM or TCMA is re-flashed and that was the only repair performed.

One or both TCM Adaptation procedures should be performed depending on the situation. Failure to perform these procedures when required could cause shift quality issues.