Diagnostic Test

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR BCM CAN BUS DTCS
1. With the scan tool, read BCM DTCs.
  Are any BCM CAN BUS DTCs present?
  
  Yes
  - Refer to the BODY CONTROL MODULE (BCM) - DIAGNOSTIC CODE INDEX - 1500 article and perform the appropriate diagnostic procedure. Perform the diagnostic procedure for DTC U0001-CAN C BUS first if the fault is present.
  - Perform the TRANSMISSION VERIFICATION TEST. Refer to TRANSMISSION VERIFICATION TEST .
  No
  - Go To 2
CHECK IF PCM DTCS ARE PRESENT
1. With the scan tool, read engine DTCs.
  Are any engine DTCs present?
  
  Yes
  - Refer to 3.6L - DIAGNOSTIC CODE INDEX - 1500 article and perform the appropriate diagnostic procedure.
  - Perform the TRANSMISSION VERIFICATION TEST. Refer to TRANSMISSION VERIFICATION TEST .
  No
  - Using the schematics as a guide, check the Transmission Control Module A (TCMA) terminals for corrosion, damage or terminal push out. If no problems are found, replace and program the TCMA in accordance with the Service Information. Refer to VALVE BODY, REMOVAL .
  - Perform the TRANSMISSION VERIFICATION TEST. Refer to TRANSMISSION VERIFICATION TEST .