LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 624 (DTCS P1D96-00 To U1479-00 - 8HP45/845RE Automatic Transmission - 1500) >> Diagnosis And Testing >> P1DC6-00-TCM Not Programmed >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Transmission Control Module (TCM) is programmed during manufacturing with generic software to facilitate testing. This software does not have the proper calibrations to control a transmission in a vehicle. The check for generic software is made at power-up. If generic software is detected by the controller the MIL will illuminate immediately and will stay illuminated until the proper software is installed.

This DTC will cause the Transmission to be placed into limp-in mode.