LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 607 (3.6L - DTCS B1810 To P0151 - 1500) >> Diagnosis And Testing >> B23C1-Stop/Start Disable Switch 2 Circuit Low >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) receives a message over the CAN BUS from the Body Control Module (BCM) that the Stop/Start Disable Switch circuit voltage is less than 0.0049 volts. One Trip Fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active. 

scientia non olet · About LEMON Manuals