Sensor, Speed, Output: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Input Speed Sensor

Courtesy of CHRYSLER GROUP, LLC

1 - OUTPUT SPEED SENSOR

2 - LINE PRESSURE SENSOR

3 - INPUT SPEED SENSOR

Raise vehicle.
Place a suitable fluid catch pan under the transmission.
Remove the wiring connector from the output speed sensor (1).
Remove the bolt holding the output speed sensor (1) to the transmission case.
Remove the output speed sensor (1) from the transmission case.