Sensor, EGR Temperature: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Engine Cover

Courtesy of CHRYSLER GROUP, LLC

Disconnect both negative battery cables.
Remove the engine cover (1).

Fig 2: Removing/Installing Intake Manifold Silencer
Courtesy of CHRYSLER GROUP, LLC
Remove the fuel injector silencer (1).

Fig 3: EGR Temperature Sensor & Wire Harness Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect EGR Temperature Sensor wire harness connector (2).
Remove the EGR Temperature Sensor (1) from EGR valve.