Valve, Positive Crankcase Ventilation (PCV), 5.7L: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying PCV Valve Location - 5.7L

Courtesy of CHRYSLER GROUP, LLC

The PCV valve (4) is mounted into the top of the intake manifold (1). This is located to the right/rear of the throttle body (2).

Fig 2: PCV Valve - 5.7L

Courtesy of CHRYSLER GROUP, LLC

The PCV valve is sealed to the intake manifold with 2 O-rings (2).
Remove PCV valve by rotating counterclockwise 90 degrees until locating tabs (3) have been freed. After tabs have cleared, pull valve straight up from intake manifold.
After valve is removed, check condition of 2 valve O-rings (2).