LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 573 (Passive Entry Module (PEM) (Service Information) 1500) >> Antenna, Passive Entry >> Installation >> Rear Cabin Wall

Rear Cabin Wall

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Antenna Assembly Fasteners
GC0154639Courtesy of CHRYSLER GROUP, LLC
  1. Install both fasteners (3) to secure the LF antenna (1) in place.
  2. Connect the connector (2) to the LF antenna.
    Fig 2: Antenna Assembly & Connector
    GC0154346Courtesy of CHRYSLER GROUP, LLC
  3. Position the rear cabin wall in place and secure using push pins. Refer to PANEL, CAB BACK TRIM, INSTALLATION .
  4. Install right rear child seat tether. Refer to ANCHOR, CHILD SEAT, INSTALLATION .
  5. Install right rear seat. Refer to SEAT, REAR, INSTALLATION or SEAT, MEGA CAB REAR, INSTALLATION .
  6. Install the right rear seat rear inboard bolt with seat belt buckle. Refer to SEAT BELT, INSTALLATION .
  7. Flip the right rear seat cushion back into the proper position for seating.
  8. Reconnect negative battery cable to the negative terminal on the battery.
scientia non olet · About LEMON Manuals