LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 565 (Starting (Service Information) 1500) >> Starter >> Removal >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Detach the cable harness retainer.
    Fig 1: B+ Battery Cable, Solenoid Connector & Starter
    GC0146618Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the solenoid connector (1).
  5. Remove the B+ battery cable retainer and remove the B+ battery cable (2).
  6. Remove the retainers and remove the starter (3).
scientia non olet · About LEMON Manuals