LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (8HP45/845RE Automatic Transmission (Service Information) 1500) >> Seal, Torque Converter Hub >> Removal >> Removal

Seal, Torque Converter Hub: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remover, Seal & Slide Hammers
GC0152247Courtesy of CHRYSLER GROUP, LLC
  1. Remove the torque converter. Refer to TORQUE CONVERTER, REMOVAL .
  2. Using (special tool #9667, Remover, Seal) and (special tool #C-3752, Slide Hammers) remove the torque converter hub seal.
scientia non olet · About LEMON Manuals