LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (8HP45/845RE Automatic Transmission (Service Information) 1500) >> Seal, Output Shaft >> Removal >> All Wheel Drive

All Wheel Drive

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Output Shaft Seal
GC0152271Courtesy of CHRYSLER GROUP, LLC
  1. Remove the transfer case. For BW44-44, refer to REMOVAL . For BW44-45, refer to REMOVAL .
  2. Remove the output shaft seal (1) with suitable screw and slide hammer.
scientia non olet · About LEMON Manuals