LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 548 (Electronic Control Modules ( Service Information) 1500) >> Connector, Star Diagnostic >> Standard Procedure >> Can C Dash Star Connector Removal

Can C Dash Star Connector Removal

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

If the CAN C Dash Star Connector locking tab is not released properly, damage to the connector housing may occur.

    Fig 1: Glove Box
    GC0086796Courtesy of CHRYSLER GROUP, LLC
  1. Remove the glove box assembly. Release the two glove box stops (1) and lower the glove box (2) downward past the stops.
    2. Fig 2: Scuff Panel
    GC0089061Courtesy of CHRYSLER GROUP, LLC
  2. Remove the right front scuff panel (1).
    3. Fig 3: CAN C Dash Star Connector & HVAC Housing
    GC0154600Courtesy of CHRYSLER GROUP, LLC
  3. Remove the passenger silencer panel.
  4. The CAN C Dash Star Connector (1) is located to the right of the HVAC housing (2), mounted to the right inner lower A-pillar.
  5. Using a pic tool (3), insert the tool between the back of the Star Connector and the sheet metal to release the lock tab. Pull down on the Star Connector (1). This will release the Star Connector from the right inner lower A-pillar.
    Fig 4: Releasing Star Connector From Right Inner Lower A-Pillar
    GC0154570Courtesy of CHRYSLER GROUP, LLC
scientia non olet · About LEMON Manuals