FITTING, Quick Connect: Description: Description

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Different types of quick-connect fittings are used to attach the various fuel system components, lines and tubes. These are: a single-button type, a two-button type, a pinch type, a single-tab type, a two-tab type or a plastic retainer ring type. Some are equipped with safety latch clips. Some may require the use of a special tool for disconnection and removal. Refer to STANDARD PROCEDURE - QUICK-CONNECT FITTINGS .

CAUTION:

Before separating a Quick-Connect fitting, pay attention to what type of fitting is being used. Refer to STANDARD PROCEDURE - QUICK-CONNECT FITTINGS . This will prevent unnecessary fitting or fitting latch breakage.

CAUTION:

The interior components (O-rings, clips) of quick-connect fittings are not serviced separately, but new plastic spacers and latches are available for some types. If service parts are not available, do not attempt to repair the damaged fitting or fuel line (tube). If repair is necessary, replace the complete fuel line (tube) assembly.