Sensor, Differential Pressure: Removal: Removal
WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the transmission skid plate. Refer to PLATE, SKID, TRANSFER CASE, REMOVAL .
- Detach the exhaust temperature sensors wire harness connectors (4, 6) and wire harness retainer (1) from bracket (5).
- Disconnect the differential pressure sensor harness connector (2).
- Remove bolts (3) and the differential pressure sensor with bracket (5).
- Disconnect the differential pressure sensor hoses (1).
- If necessary, remove mounting bolts (3) securing the differential pressure sensor tubing to transmission.
- If necessary, remove the differential pressure sensor tubing (6) from the diesel particulate filter (4).