Lower Oil Pan

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the front suspension skid plate.
Drain the engine oil. Install and tighten drain plug to 45 N.m (33 ft. lbs.).

Fig 1: Removing/Installing Crossmember
Courtesy of CHRYSLER GROUP, LLC
Remove bolts (1) and the front suspension crossmember (3).

Fig 2: Lower Oil Pan & Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove bolts (1) and the lower oil pan (2).