Cleaning - Oil Pan

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Mopar® Threebond Engine RTV Sealant Locations

Courtesy of CHRYSLER GROUP, LLC

Fig 2: Mopar® Threebond Engine RTV Sealant Location

Courtesy of CHRYSLER GROUP, LLC

Clean the oil pan in solvent and wipe dry with a clean cloth.
CAUTION:
Do not use oil based liquids, wire brushes, abrasive wheels or metal scrapers to clean the engine gasket surfaces. Use only isopropyl (rubbing) alcohol, along with plastic or wooden scrapers. Improper gasket surface preparation may result in engine fluid leakage.
Remove all residual sealant (1) from the upper and lower oil pans. Refer to ENGINE GASKET SURFACE PREPARATION .