3.0L Common Rail Diesel Engine

The 3.0L (183 C.I.D.) six - cylinder "common rail" direct injection engine is a 60° overhead valve design. The engine utilize a cast iron cylinder block. The engine has aluminum cross flow cylinder heads, four valves per cylinder, central injectors and dual overhead camshafts. The 3.0L is turbocharged, intercooled, and also equipped with a EGR cooler.

Additional features are:

• Finger Follower Actuated Valves with Hydraulic Adjusters
• Turbocharger and intercooler
• Oil Jet Cooled Pistons
• Swirl Intake Ports
• Water cooled exhaust gas recirculation, Compliance with EURO V emission regulations
• Chain driven D.O.H.C. per bank of cylinders, with 4 valves per cylinder

The engine identification stamp (3) for the 3.0L is located on the right side of the engine block, by the generator behind its mounting bracket.