LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (3.0L Diesel (Service Information) 1500) >> Cylinder Head >> Valves, Intake And Exhaust >> Standard Procedure >> Valve Service >> Inspection

Valve Service: Inspection

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Valve Spring Chart
GC0081871Courtesy of CHRYSLER GROUP, LLC
DESCRIPTION Load Kg HEIGHT mm STATE
P1 
H1 0 Kg 44.1 mm (1.736 in.) Free Length
P2 
H2 24 Kg 34 mm (1.338 in.) Closed Valve
P3 
H3 46 Kg 25.5 mm (1.003 in.) Valve Open
  1. Inspect for cracks in the combustion chambers and valve ports.
  2. Inspect for cracks on the exhaust seat.
  3. Inspect for cracks in the gasket surface at each coolant passage.
  4. Inspect valves for burned, cracked or warped heads.
  5. Inspect for scuffed or bent valve stems.
  6. Replace valves displaying any damage.
  7. Use the above table for check valve spring height.