LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (3.0L Diesel (Service Information) 1500) >> Cylinder Head >> Valves, Intake And Exhaust >> Standard Procedure >> Valve Service >> Disassembly

Valve Service: Disassembly

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cylinder head from the cylinder block. Refer to CYLINDER HEAD, REMOVAL .
  2. Use Valve Spring Compressor Tool (special tool #C-3422-D, Compressor, Valve Spring) and Valve Spring Compressor Adapter (special tool #10224, Adapter, Valve Spring) and compress each valve spring.
  3. Remove the valve locks, retainers, and springs.
  4. Use a smooth stone or a jewelers file to remove any burrs on the top of the valve stem, especially around the groove for the locks.
  5. Remove the valves, and place them in a rack in the same order as removed.
scientia non olet · About LEMON Manuals