LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (3.0L Diesel (Service Information) 1500) >> Cylinder Head >> Valves, Intake And Exhaust >> Standard Procedure >> Valve Seals

Valve Seals

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the cylinder head and place on work bench. Refer to CYLINDER HEAD, REMOVAL .
    Fig 1: Valve Seal
    GC0095642Courtesy of CHRYSLER GROUP, LLC
  3. Use Valve Spring Compressor Tool (special tool #C-3422-D, Compressor, Valve Spring) and Valve Spring Compressor Adapter (special tool #10224, Adapter, Valve Spring) and compress each valve spring.
  4. Remove the valve locks, retainers, and springs.
  5. Remove the valve seal (1).
  6. Repeat this procedure for all cylinders.
scientia non olet · About LEMON Manuals