LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 532 (Instrument Cluster (Service Information) - 1500) >> Pod, Switch >> Installation >> Installation

Pod, Switch: Installation: Installation

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the switch pod to the instrument panel center bezel.
    Fig 1: Switch Pod Electrical Connectors & Fasteners
    GC0154419Courtesy of CHRYSLER GROUP, LLC
  2. Install the switch pod fasteners (1) and (4) to the center bezel.
  3. Connect the switch pod electrical connectors (2) and (3).
  4. Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals