LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Navigation/Telecommunication (Service Information)) >> ANTENNA, Navigation >> Removal >> Removal

ANTENNA, Navigation: Removal: Removal

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Navigation Antenna
GC0137122Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument panel center bezel. Refer to BEZEL, Instrument Panel, Center , Removal and BEZEL, Instrument Panel, Driver Side , Removal .
  3. Remove the radio. Refer to RADIO , Removal .
  4. Unclip the antenna from the antenna mounting bracket.