LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 524 (Steering System - 1500) >> Column >> Wheel, Steering >> Removal >> Removal

Wheel, Steering: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Steering Wheel Bolt
GC0094866Courtesy of CHRYSLER GROUP, LLC
  1. Disable and remove the driver's side airbag. Refer to AIR BAG, DRIVER, REMOVAL .
  2. Remove the steering wheel bolt and discard.
    NOTE:

    The jaws should point outward from the center of the steering wheel for removal.

  3. Install Gear Puller (special tool #L-4407A, Puller, Gear) (1) and OTC® 7929A jaws (3) or equivalent and loosen the steering wheel (2).
  4. Remove the tools (1, 3) and then remove the steering wheel (2).
scientia non olet · About LEMON Manuals