LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 513 (Powertrain Control Module (Pcm) - Electrical Diagnostics - 62TE Automatic Transmission) >> DTC Troubleshooting >> P0935-Line Pressure Sensor Circuit High >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
(T38) LINE PRESSURE SIGNAL CIRCUIT OPEN
(T853) SENSOR GROUND CIRCUIT OPEN
(T38) LINE PRESSURE SIGNAL CIRCUIT SHORTED TO VOLTAGE
LINE PRESSURE SENSOR
POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  62TE - PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE   . 

scientia non olet · About LEMON Manuals